loading spinner

Top sellers

Information

Top sellers

per page
Showing 1 - 20 of 22 items
  • 1,00 € Out of stock

    The 868MHz helical antenna, for most applications, where space constraints exist, a simple helical Antenna can be used. The helical Antenna is a simple construction made from wound solid copper wire.

    1,00 €
    Add to cart More
    Out of stock
  • 12,00 € In Stock

    The Pi IC880A Adapter board is the best adaptation to fit you iC880A concentrator in the raspberry pi. It allows you to spare some space as it fits right in the top of raspberry taking the smallest  footprint possible, and also because it provides an USB power port in the same direction of all the remaining connections, making it easier to fit in a...

    12,00 €
    In Stock
  • The GSM helical antenna, for most applications, where space constraints exist, a simple helical Antenna can be used. The helical Antenna is a simple construction made from wound solid copper wire.

    1,00 €
    In
  • 5,00 € In Stock

    A flexible hinged whip Antenna with +3dBi gain for general applications operating at 868MHz where high performance is required. Using this antenna will give optimum range and reliability to your application.

    5,00 €
    In Stock
  • 2,48 € Out of stock

    Adapter cable between U.FL and SMA(F), it is ideal to fit the SMA end on the enclosure and interface the SMA antena with the PCB.

    2,48 €
    Add to cart More
    Out of stock
  • 0,42 € Out of stock

    U.FL smd coaxial connector, occupies a small footprint which makes it ideal to mount on boards where the regular SMA doesn't fit.

    0,42 €
    Add to cart More
    Out of stock
  • 33,00 € Out of stock

    The Lora Hack - MCHP module is a tiny Arduino™ compatible development board with LoRaWAN™ capability built-in. It is tailored for battery powered long-range monitoring and control applications. It will allow you to connect anything to the cloud. 

    33,00 €
    Add to cart More
    Out of stock
  • 31,00 € In Stock

    The IOT Tremoco module is a tiny Arduino™ Zero compatible development board with LoRaWAN™ capability built-in. It is tailored for battery powered long-range monitoring and control applications. And you can choose the transceiver to be mounted on it, either the powerful RN2483A/2903A or the least expensive RFM95W.

    31,00 €
    In Stock
  • 20,00 € Out of stock

    The RF transceiver module RFM95W feature the LoRa™ long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.

    20,00 €
    Add to cart More
    Out of stock
  • 24,00 € Out of stock

    The Lora Hack - HPRF module is a tiny Arduino™ compatible development board with LoRa capability built-in. It is tailored for battery powered long-range monitoring and control applications. It will allow you to connect anything to the cloud.

    24,00 €
    Add to cart More
    Out of stock
  • 9,90 € Out of stock

    Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, extremely light weight and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1500mAh for a total of about 6Wh. Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins.

    9,90 €
    Add to cart More
    Out of stock
  • 3,79 € In Stock

    A miniature antenna for demanding applications. This antenna provides operation and high performance across a broad spectrum of frequencies. Housed in a rugged low profile ABS, this antenna is compact and resistant to vandalism.

    3,79 €
    In Stock
  • 22,00 € Out of stock

    The Lora Hack Shield - MCHP module is an Arduino™ shield for the Lora / LoRaWAN™ radio RN2483. It comes with 2 antenna connectors (868MHz & 433MHz) and a prototyping area. This shield will provide your arduino with Long Range communication capability.

    22,00 €
    Add to cart More
    Out of stock
  • 4,90 € In Stock

    IOT Docking Proto is a prototyping board for our communication Hack boards (Lora Hack, Sigfox Hack, GSM Hack, etc). The board is composed of two distinct prototyping areas, one for SMD components and the other for trough hole components. It is very easy to compose your own circuit. The board shape and dimensions were determined so it fits exactly in one...

    4,90 €
    In Stock
  • 5,95 € Out of stock

    Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, extremely light weight and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 800mAh for a total of about 3.1Wh. Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins.

    5,95 €
    Add to cart More
    Out of stock
  • 5,00 € In Stock

    Sealed ABS Plastic Enclosure (115x90x55mm)

    5,00 €
    In Stock
  • 4,91 € In Stock

    A rugged, flexible 1/4 length wavelengh whip antenna. The antenna is ideal for; telemetry, M2M applications or general low power radio applications. This flexible antenna is on 433MHz and has an SMA(M) connector.

    4,91 €
    In Stock
  • 40,00 € In Stock

    The GSM Hack module is a tiny Arduino™ compatible development board with GSM/GPRS capability built-in. It is tailored for battery powered long-range monitoring and control applications. It will allow you to connect anything to cloud taking advantage of the existing worldwide GSM coverage. You can also make your application call you when something happen...

    40,00 €
    In Stock
  • 8,05 € In Stock

    FTDI Hack is a miniature breakout board for the FTDI chip FT231XQ. It comes with a USB micro in one end and the serial pins in the other (FTDI pinout). It is compatible with 3,3V and 5V hosts and can provide power to your project up to 50mA.

    8,05 €
    In Stock
  • 3,90 € In Stock

    Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, extremely light weight and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 250mAh for a total of about 1Wh. Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins.

    3,90 €
    In Stock
Showing 1 - 20 of 22 items